Item# HS-200-16

EPOXY, 16 OZ. SOLIDBOND

Product Description

HS-200 Epoxy Anchoring Gel is a two component (2:1 ratio), 100% solids, high modulus, structural epoxy gel. It is a solvent free, no odor, high strength, moisture insensitive, non-sag epoxy system. HS-200 has a long working time (20 minutes at 75° F), while providing an anchor that can be loaded in as little as 4 hours. HS-200 has been tested in accordance with ICC - AC58 and is acceptable for long term tensile loads. It may also be used for short term tensile load anchors, which includes wind and seismic forces.

General Uses
•Anchoring threaded rod, bolts, rebar and smooth dowels into concrete, grout filled block, and unreinforced masonry.
•Seismic anchoring and bracing
•Grouting dowel bars and tie bars for full-depth concrete pavement repairs

Advantages and Features
•High strength
•Moisture insensitive
•Non-sag epoxy system

Details
Spec Sheet View the Spec Sheet for this product
MSDS View the MSDS for this product
Manufacturer ADHESIVES TECHNOLOGIES
Warranty

Recently Viewed